3 BCPE 0,5-32 (SCHVVP )

Code of product:
VD-25
In stock
€134.00

More Information

Voltage, V 230
Nominal supply head, m 32
Maximum volumetric flow rate, Q max, m3/h 2.9
Rated capacity m.cubic metres/hour 1.8
Outer diameter of the pump, mm 75
Weight, kg 13.8
Current consumption, A 3.5
Number of stages of the pumping part 16
Capacitance of a capacitor with a voltage of 400 V, µF 30
Weight, not more than, kg, gross 13.8
Weight, not more than, kg, net 12.5
Operating mode Long lasting
Mains frequency Hz 50
Rotational speed, rpm 2800
Rated power consumption, W 800
Maximum head H max, m 52

Description

Centrifugal submersible pump 3 inches BЦPE 0,5-32U cable 32 metresWorking range:Optimum performance - 0.5 l/s (1.8 m 3 /h), maximum - 0.8 l/s (2.9 m 3 /h);Lifting height up to 95 metres;Outer diameter 75 mm.A characteristic feature of the 3" BЦPE-0,5 series pumps is the outer diameter of 75 mm, which makes it possible to use pumps of this series in narrow wells with a diameter of 80 mm and more, which significantly expands the scope of their Household submersible electric pumps "Vodoley" series 3 "BTSPE-0,5 are designed to supply water from underground wells, wells and open reservoirs, use for domestic and technical purposes, in particular watering GENERAL OPERATING CONDITIONS:temperature of the pumped water is not more than 35 0 C;water should not contain sand and other visible mechanical impurities;pumping of aggressive liquids is prohibited;water salinity is allowed not more than 1500 g/m 3 ;the electric pump operates only when completely immersed in water, at the same time the distance from the bottom of the well to the pump should be at least 0.4 m, and the water level above the pump should be at least 1.0 m; the debit of the well should exceed the pump capacity; before the first start-up, the pump should be kept under water for at least 5-10 minutes; the minimum capacity of the electric pump should be at least 0.36 m 3 /h. DESIGN: 3" BTSPE-0.5 "Vodoley" are multi-stage high-pressure pumping units. This series of pumps is equipped with an asynchronous single-phase electric motor, designed for an operating voltage of 230 V, network frequency 50 Hz. Water is sucked through a filter located in the middle part of the pump. The electric motor is actively cooled by due to the flow of pumped water between the well casing and the pump. The parts of the electric pump flowing part are made of corrosion-resistant materials: stainless steel, brass, food grade plastic, which ensures environmental cleanliness of the supplied water.Each submersible pump has an electric cable with an electric plug of the appropriate length, which is fixed The warranty period for all products is 24 months from the date of sale.

Characteristics

Voltage, V 230
Nominal supply head, m 32
Maximum volumetric flow rate, Q max, m3/h 2.9
Rated capacity m.cubic metres/hour 1.8
Outer diameter of the pump, mm 75
Weight, kg 13.8
Current consumption, A 3.5
Number of stages of the pumping part 16
Capacitance of a capacitor with a voltage of 400 V, µF 30
Weight, not more than, kg, gross 13.8
Weight, not more than, kg, net 12.5
Operating mode Long lasting
Mains frequency Hz 50
Rotational speed, rpm 2800
Rated power consumption, W 800
Maximum head H max, m 52
Category3 BCPE 0,5

Reviews (0)

0  of reviews
Product code: VD-25
Leave review
Leave review