Water pump "Vodoley" BCPE 0,5-80U (H07BB-F 4G1,5)
Code of product:
VD-60
In stock
More Information
| Voltage, V | 230 |
|---|---|
| Nominal supply head, m | 80 |
| Maximum volumetric flow rate, Q max, m3/h | 3.6 |
| Rated capacity m.cubic metres/hour | 1.8 |
| Outer diameter of the pump, mm | 105 |
| Weight, kg | 23.9 |
| Current consumption, A | 7.5 |
| Number of stages of the pumping part | 14 |
| Capacitance of a capacitor with a voltage of 400 V, µF | 48 |
| Weight, not more than, kg, gross | 23.9 |
| Weight, not more than, kg, net | 22 |
| Operating mode | Long lasting |
| Mains frequency Hz | 50 |
| Rotational speed, rpm | 2800 |
| Rated power consumption, W | 1630 |
| Maximum head H max, m | 115 |
Description
Centrifugal submersible pump 4 inch BCPE 0.5-80U, 63-meter cable
OPERATING RANGE:
Optimal performance - 0.5 l/s (1.8 m³/h), maximum - 1 l/s (3.6 m³/h);
Lifting height up to 142 meters;
Outer diameter 105 mm.
The "Vodnik" series 4"BCPE-0.5 domestic submersible electric pumps are designed for supplying water from underground wells, boreholes, and open water bodies, for domestic and technical purposes, including garden plot irrigation.
GENERAL OPERATING CONDITIONS:
the temperature of the pumped water should not exceed 35°C;
the water should not contain sand or other visible mechanical impurities;
pumping of aggressive liquids is prohibited;
allowable water mineralization should not exceed 1500 g/m³;
the electric pump operates only when fully submerged in water, with a distance from the well bottom to the pump of at least 0.4 meters, and a water level above the pump of at least 1.0 meter;
the well yield should exceed the pump's performance;
before the first start, the pump should be kept underwater for at least 5-10 minutes;
the minimum performance of the electric pump should be at least 0.36 m³/h.
DESIGN:
The 4"BCPE-0.5 "Vodnik" are multistage high-pressure pump units. This series of pumps is equipped with an asynchronous single-phase electric motor designed for an operating voltage of 230 V, network frequency of 50 Hz.
Water suction occurs through a filter located in the middle part of the pump. Active cooling of the electric motor is provided by the flow of pumped water between the well casing tube and the pump.
The parts of the pump's flow section are made of corrosion-resistant materials: stainless steel, brass, and food-grade plastic, ensuring the environmental cleanliness of the supplied water.
Each submersible pump is equipped with an electrical cable with a plug of appropriate length, to which a capacitor module is attached.
The warranty period for all products is 24 months from the date of sale.
Characteristics
| Voltage, V | 230 |
|---|---|
| Nominal supply head, m | 80 |
| Maximum volumetric flow rate, Q max, m3/h | 3.6 |
| Rated capacity m.cubic metres/hour | 1.8 |
| Outer diameter of the pump, mm | 105 |
| Weight, kg | 23.9 |
| Current consumption, A | 7.5 |
| Number of stages of the pumping part | 14 |
| Capacitance of a capacitor with a voltage of 400 V, µF | 48 |
| Weight, not more than, kg, gross | 23.9 |
| Weight, not more than, kg, net | 22 |
| Operating mode | Long lasting |
| Mains frequency Hz | 50 |
| Rotational speed, rpm | 2800 |
| Rated power consumption, W | 1630 |
| Maximum head H max, m | 115 |
| Category | Water pump "Vodoley" BCPE 0,5 |
Reviews (0)
0 of reviews
Product code: VD-60

