Water pump "Vodoley" BCPE 1,2-25U (H05 4*1,5;H07BB-F 4G1)

Code of product:
VD-44
In stock
€109.00

More Information

Voltage, V 230
Nominal supply head, m 25
Maximum volumetric flow rate, Q max, m3/h 9.4
Rated capacity m.cubic metres/hour 4.3
Outer diameter of the pump, mm 105
Weight, kg 11.9
Current consumption, A 4.2
Number of stages of the pumping part 4
Capacitance of a capacitor with a voltage of 400 V, µF 20
Weight, not more than, kg, gross 11.9
Weight, not more than, kg, net 10.8
Operating mode Long lasting
Mains frequency Hz 50
Rotational speed, rpm 2800
Rated power consumption, W 900
Maximum head H max, m 37

Description

Centrifugal submersible pump 4 inches BCPE 1.2-25U, cable 25 meters WORKING RANGE: Optimal performance – 1.2 l/s (4.3 m³/h), maximum – 2.6 l/s (9.4 m³/h); Lifting height up to 105 meters; Outer diameter 105 mm. Domestic submersible electric pumps "Vodnik" series 4"BCPE-1.2 are designed for supplying water from underground wells, boreholes, and open water bodies, for household and technical purposes, including irrigation of garden plots. GENERAL OPERATING CONDITIONS: The temperature of the pumped water must not exceed 35 °C; Water must not contain sand or other visible mechanical impurities; Pumping of aggressive liquids is prohibited; Allowable mineralization of water must not exceed 1500 g/m³; The electric pump operates only when fully submerged in water, with a distance from the bottom of the well to the pump of at least 0.4 m and a water level above the pump of at least 1.0 m; The yield of the well must exceed the performance of the pump; Before the first start, the pump should be kept underwater for at least 5-10 minutes; The minimum performance of the electric pump should be at least 0.36 m³/h. CONSTRUCTION: 4"BCPE-1.2 "Vodnik" is a multistage high-pressure pumping unit. This series of pumps is equipped with a single-phase asynchronous electric motor designed for a working voltage of 230 V and a network frequency of 50 Hz. Water intake occurs through a filter located in the middle part of the pump. Active cooling of the electric motor occurs due to the flow of pumped water between the casing of the well and the pump. The parts of the hydraulic section of the electric pump are made of corrosion-resistant materials: stainless steel, brass, and food-grade plastic, ensuring the ecological purity of the supplied water. Each submersible pump has an electric cable of the appropriate length with a connected capacitor unit. The warranty period for all products is 24 months from the date of sale.

Characteristics

Voltage, V 230
Nominal supply head, m 25
Maximum volumetric flow rate, Q max, m3/h 9.4
Rated capacity m.cubic metres/hour 4.3
Outer diameter of the pump, mm 105
Weight, kg 11.9
Current consumption, A 4.2
Number of stages of the pumping part 4
Capacitance of a capacitor with a voltage of 400 V, µF 20
Weight, not more than, kg, gross 11.9
Weight, not more than, kg, net 10.8
Operating mode Long lasting
Mains frequency Hz 50
Rotational speed, rpm 2800
Rated power consumption, W 900
Maximum head H max, m 37
CategoryWater pump "Vodoley" BCPE 1,2

Reviews (0)

0  of reviews
Product code: VD-44
Leave review
Leave review