Water pump "Vodoley" BCPE 1,2-80U (H07BB-F 4G1,5)
Code of product:
VD-49
In stock
More Information
| Voltage, V | 230 |
|---|---|
| Nominal supply head, m | 80 |
| Maximum volumetric flow rate, Q max, m3/h | 9.4 |
| Rated capacity m.cubic metres/hour | 4.3 |
| Outer diameter of the pump, mm | 105 |
| Weight, kg | 29.5 |
| Current consumption, A | 12.9 |
| Number of stages of the pumping part | 11 |
| Capacitance of a capacitor with a voltage of 400 V, µF | 72 |
| Weight, not more than, kg, gross | 29.5 |
| Weight, not more than, kg, net | 27.1 |
| Operating mode | Long lasting |
| Mains frequency Hz | 50 |
| Rotational speed, rpm | 2800 |
| Rated power consumption, W | 2820 |
| Maximum head H max, m | 108 |
Description
Centrifugal Submersible Pump 4 Inches BЦПE 1.2-80U, 80-Meter Cable
WORKING RANGE:
Optimal performance – 1.2 l/s (4.3 m³/h), maximum – 2.6 l/s (9.4 m³/h);
Lift height up to 105 meters;
Outer diameter 105 mm.
Household submersible electric pumps "Vodnik" series 4"BЦПE-1.2 are designed for pumping water from underground wells, shafts, and open water bodies, for household and technical purposes, including irrigation of garden plots.
GENERAL OPERATING CONDITIONS:
The temperature of the pumped water must not exceed 35 °C;
Water must not contain sand or other visible mechanical impurities;
Pumping of aggressive liquids is prohibited;
Water mineralization must not exceed 1500 g/m³;
The electric pump operates only when fully submerged in water, while the distance from the bottom of the well to the pump must be at least 0.4 m, and the water level above the pump must be at least 1.0 m;
The well yield must exceed the pump performance;
Before the first start-up, the pump should be submerged underwater for at least 5-10 minutes;
The minimum performance of the electric pump must not be less than 0.36 m³/h.
CONSTRUCTION:
4"BЦПE-1.2 "Vodnik" represents multi-stage high-pressure pump units. This series of pumps is equipped with a single-phase asynchronous electric motor designed for an operating voltage of 230 V and a network frequency of 50 Hz.
Water intake occurs through a filter located in the middle part of the pump. Active cooling of the electric motor occurs due to the flow of pumped water between the casing of the well and the pump.
The parts of the flow section of the electric pump are made of corrosion-resistant materials: stainless steel, brass, food-grade plastic, which ensures the ecological purity of the supplied water.
Each submersible pump has an electric cable with a corresponding length electrical plug, to which a capacitor extension is attached.
The warranty period for all products is 24 months from the date of sale.
Characteristics
| Voltage, V | 230 |
|---|---|
| Nominal supply head, m | 80 |
| Maximum volumetric flow rate, Q max, m3/h | 9.4 |
| Rated capacity m.cubic metres/hour | 4.3 |
| Outer diameter of the pump, mm | 105 |
| Weight, kg | 29.5 |
| Current consumption, A | 12.9 |
| Number of stages of the pumping part | 11 |
| Capacitance of a capacitor with a voltage of 400 V, µF | 72 |
| Weight, not more than, kg, gross | 29.5 |
| Weight, not more than, kg, net | 27.1 |
| Operating mode | Long lasting |
| Mains frequency Hz | 50 |
| Rotational speed, rpm | 2800 |
| Rated power consumption, W | 2820 |
| Maximum head H max, m | 108 |
| Category | Water pump "Vodoley" BCPE 1,2 |
Reviews (0)
0 of reviews
Product code: VD-49

